Zigbee intercom control module SMARTLIGHT SLZB-01
INTERNATIONAL DELIVERY (outside Ukraine):
- AVIA+TRACKING NUMBER! If you need international delivery (outside Ukraine) - choose the currency to US dollars (upper right side), and during the checkout choose "International delivery", fill in the delivery address, make payment online and that is it.
We also speak English by any means of communication - phone, Viber, Whatsapp, Telegram, email (see contacts at the top of the page).
- Local taxes, if any, are the responsibility of the buyer.
Zigbee module for opening the coordinate doorphone SLZB-01 is a module that is installed between the doorphone line and the doorphone and allows you to control the doorphone through the Zigbee protocol.
Made on the basis of the project of the respected @xyzroe.
Work state modes (toggled with a single short press of a button or via exposes zigbee2mqtt):
- Never - standard intercom operation mode;
- Once - opening the doors once when you call the receiver
- Always - automatic opening of doors for all calls to the handset
- Drop - drop all calls
Working with sound (switched by pressing a button from 2 to 5 seconds or via exposes zigbee2mqtt):
- Sound ON - enable sound on the handset;
- Sound OFF - mute the sound on the handset;
- Correct silk-screen printing (inscriptions about where what) in comparison with the original;
- A diode is added on the board, ensures that there are no fake calls to other apartments (the bug is described in the original project);
- Possibility to supply power via microUSB, through a screw block or to solder the unit with batteries - there is a place for soldering;
- By default, it is flashed in the "router" Zigbee 3.0 mode, it is possible to flash in the "end device" mode;
- Dimensions LxWxH: 61x25x11mm; The size allows you to place the intercom inside the tube body;
- Work with coordinate (matrix) intercoms like Cyfral, Metakom, Vizit, Atis
- Button for physical control of the device;
- LED for feedback of device operation;
- Pairing mode - press and hold the button for more than 5 seconds, or apply power 10 times with an interval of 10 seconds each;
- If you do not have 5 volts for power, miniature 5V power supplies are available - 3W options are sufficient (cheaper)
Connection and installation:
- You should have zigbee2mqtt working.
- Put the external attachment in the zigbee2mqtt root folder https://smartlight.me/files/support/firmware/smartlight/slzb01_domofon/slzb-01.js
- In zigbee2mqtt config add:
- line: minus to Line-, plus to the middle terminal between Line- and Phone-;
- intercom: minus to Phone-, plus to the middle terminal between Line- and Phone-;
Warranties and Returns:
- valid only for orders within Ukraine;
- within 14 days from the date of ordering.
Countries where our devices work:
В новых версиях z2m добавлять конвертер уже не нужно.
Еще погоняю, но пока все прекрасно.