SLWF-11.
Big light. Small board.
SLWF-11 by SMLIGHT is a compact controller that turns any addressable LED strip into a smart light. It ships pre-flashed with WLED — the most popular open-source LED firmware — so you can wire up a strip, join it to your Wi-Fi and start painting light from your phone within minutes of unboxing. No hub, no cloud account, no subscription.
Millions of colours, hundreds of animated effects, schedules, presets and multi-device sync — all running locally on the board and controlled from a free app on your phone, tablet or computer.
The SLWF-11 is a tiny WLED controller — the brain that sits between your power supply and your LED strip and makes it addressable and smart. Screw in a few wires and every LED becomes individually controllable: solid colours, gradients, chases, music-reactive effects and more.
Strips from 5 V to 24 V are supported.
| 3-wire (data only) | WS2812B, WS2811, SK6812 and similar. |
| 4-wire (data + clock) | APA102, SK9822, WS2801 and other clocked strips. |
| 5 V-tolerant | WS2815 and other 5 V-tolerant strips. |
Both bundles include the same board with its built-in IR receiver; only Bundle 2 adds the physical remote.
Both are SMLIGHT WLED controllers. The SLWF-11 (ESP8266) is the compact, essentials-first choice and supports sound-reactive effects with a small external microphone. The SLWF-03 (ESP32) has a built-in digital microphone for sound-reactive lighting out of the box.
SLWF-11 controller in a retail box with a quick-start guide. The IR remote is included only with the IR-remote bundle (see “Choose your bundle” above).
| Type | Wi-Fi addressable-LED (WLED) controller |
| Controller | ESP8266, pre-flashed with WLED |
| Outputs | Level-shifted Data (GPIO2) + Clock (GPIO12), 5 V logic |
| Strips | 3-wire (WS2812B, WS2811, SK6812) · 4-wire (APA102, SK9822, WS2801) · WS2815 · 5–24 V |
| Power | USB-C (5 V) · DC barrel 5.5 × 2.1 mm · screw terminal — one at a time |
| IR | Built-in 38 kHz receiver (GPIO4). Remote in IR bundle only. |
| Controls | Push button (GPIO0) · 2 × status LEDs (GPIO14 / GPIO16) |
| Flashing | Built-in USB-to-UART — reflash over USB-C, no adapter |
| Expansion | DIY header — spare GPIOs, ADC input, 3.3 V / GND |
| Software | WLED (100+ effects, 65M colours, apps, schedules, sync, OTA) · ESPHome / Home Assistant |
Немає відгуків про цей товар.
Немає запитань про цей товар.
