New arrival
$14.99

USB Zigbee/Thread stick · SMLIGHT

SLZB-07x.

The smallest way to add Zigbee to your server.

SLZB-07x by SMLIGHT is a compact USB stick that connects your Zigbee or Thread network directly to your smart home server. It is simply a radio chip behind a USB converter in a compact enclosure with an antenna. Plug it into a port — and it works.

The series consists of five models with the same enclosure and USB bridge — only the radio chip inside differs. First, what the device does, then which model to choose.

What it does
Zigbee coordinator or router
Manages your Zigbee network directly out of the box — compatible with Zigbee2MQTT and ZHA, with no additional drivers.
Thread/Matter radio
On compatible chips, it works as a Thread radio for a Matter-over-Thread border router in Home Assistant.
Plug-and-play, no cables
Comes pre-flashed. No toolchain or flashing cable is needed to get started — just a USB port.
Compact size — 54 × 18 × 10 mm
The smallest USB Zigbee stick in the SMLIGHT lineup with an external antenna. The slim enclosure does not block neighboring ports on a server or USB hub.

Ideal for
Your first Zigbee stick for Home Assistant or as a replacement for an old CC2531/CC2652 dongle.
A server, mini-PC or Raspberry Pi, where the device plugs directly into a port.
Multiple coordinators on one server for different rooms or networks.

Choose a model
Everything is the same except the radio chip
Model SLZB-07
MAINSTREAM
SLZB-07Mg24
MG24
SLZB-07Mg26
PREMIUM
SLZB-07p7
TI EXTENDED
SLZB-07p10
TI RECOMMENDED
Radio chip EFR32MG21 EFR32MG24 EFR32MG26 CC2652P7 CC2674P10
Vendor Silicon Labs Texas Instruments
How to get started
01
Connect to a USB port
Server, mini-PC, Raspberry Pi, or NAS — any available USB-A port. No drivers required.
02
Select the dongle in the software
Zigbee2MQTT, ZHA, or the Thread integration will automatically detect the device on its serial port.
03
Done
The network is ready. Radio chip firmware can be updated remotely through access to the server.


Key hardware features
Built-in +20 dB amplifier
Together with the external antenna, it covers remote corners without a USB extension cable.
Rotatable +3 dB antenna
External, with 3-axis adjustment — point it toward the network rather than the server wall.
4-layer PCB
Isolates the radio chip from USB bus and neighboring device interference — maintaining the connection even in dense server racks.
USB-powered
No separate power supply is required — the device is powered from the same USB-A port.
Exposed pin headers
Exposed radio chip pins for DIY flashing, debugging, and custom firmware.
Compact enclosure
54 × 18 × 10 mm — does not occupy the neighboring port on a dense board or USB hub.
Firmware features
Remote radio chip updates
The radio firmware can be updated remotely with access only to the host server — without physical access to the device.
Multiple coordinators on one server
Connect multiple SLZB-07x devices to one server — for separate Zigbee networks or extended coverage with multiple coordinators.
Autoflash on Silicon Labs models
EFR32 variants (07, 07Mg24, 07Mg26) support USB flashing without additional cables or a toolchain.

Compatibility
Tested and verified
Zigbee Zigbee2MQTT, ZHA — coordinator or router mode, out of the box.
Thread / Matter On compatible chips — via the Thread/OTBR add-on for Home Assistant.
Hardware Servers, mini-PCs, Raspberry Pi, Synology NAS — any USB-A port.

Technical specifications
Type USB Zigbee/Thread coordinator, series with 5 chip variants
Radio chip EFR32MG21 / EFR32MG24 / EFR32MG26 / CC2652P7 / CC2674P10 — depending on the model (see the table above)
Connection USB-A, powered from the same port
Ethernet / Wi-Fi / PoE None — direct USB connection only
Antenna External, +3 dB, rotatable (3-axis), +20 dB amplifier on the board
Web interface / SLZB-OS None — configuration through host software (Zigbee2MQTT, ZHA)
Dimensions 54 × 18 × 10 мм
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Have a look on this
Similar products
Bestseller!
New arrival
SLZB-MRxU Zigbee+Thread Ethernet PoE USB LAN WIFI Adapter
SLZB-MRxU Zigbee+Thread Ethernet PoE USB LAN WIFI Adapter
Multi-radio Ethernet coordinator series · Zigbee + Thread simultaneously · SLZB-OS · SMLIGHT ..
$37.99
New arrival
SMHUB-Nano MRx
SMHUB-Nano MRx
Compact Linux hub · 2× Zigbee/Thread · SMHUB-OS · SMLIGHT SMHUB NanoMR. Two radios. One Li..
$52.99
New arrival
USB-A-to-Type-C Adapter (90°) 15cm
USB-A-to-Type-C Adapter (90°) 15cm
OTG adapter · USB-C → USB-A · SMLIGHT USB-A-to-Type-C Adapter. 15 cm. Angled. ..
$2.90
New arrival
SMLIGHT addons — Ethernet, 4G, Z-Wave, PoE, Microphone
SMLIGHT addons — Ethernet, 4G, Z-Wave, PoE, Microphone
Expansion modules · optional add-ons · SMLIGHT Addons. One hub. Multiple capabilit..
$0.00
New arrival
SMLIGHT USB Extender
SMLIGHT USB Extender
USB expansion board · for SLZB / SMHUB · SMLIGHT USB Extender. More ports. More radios. ..
$9.99
0
0