New arrival
$0.00

Ethernet Coordinator Series · Zigbee · Thread · SLZB-OS · SMLIGHT

SLZB-06xU.

Six radio chip options.

SLZB-06xU — an SMLIGHT Ethernet adapter that connects your Zigbee or Thread network to your local network via cable, PoE, or Wi-Fi. It acts as a coordinator or router for a smart home — an intermediary between your Zigbee/Thread devices (lights, sensors, switches) and a server such as Home Assistant.

The series consists of six models with the same enclosure and firmware — only the radio chip inside differs. Below, we first explain what the device does, and then which model to choose.

What it does
Zigbee coordinator or router
Manages your Zigbee network directly (coordinator mode) or extends its coverage (router mode). Compatible with Zigbee2MQTT and ZHA.
Thread border router
The same device, switched to Thread/Matter mode with one click — serves your Matter-over-Thread network.
USB devices over the network
Additionally: a USB device connected to it (Z-Wave, BLE, 4G modem) becomes available over the network — just like the built-in radio chip.
Power — PoE, USB-C, or both simultaneously
PoE 802.3af (48V) or USB-C (5V). Both power sources can be connected simultaneously — the input is optically isolated, so they do not interfere with each other.

Compatibility
Tested and verified
ZigbeeZigbee2MQTT, ZHA — coordinator or router mode.
Thread / MatterMatter-over-Thread border router via OTBR, switched with one click from Zigbee mode.
BluetoothBLE Proxy for Home Assistant — simultaneously with Zigbee/Thread, without reflashing.
USB PassthroughZ-Wave dongles, BLE modules, 4G modems, and other devices based on CP2102 / CH340 / CDC\_ACM.
ServersHome Assistant (native SMLIGHT integration), Z-Wave JS UI, openHAB, HomeSeer.
Choose a model
Everything is identical except the radio chip
Model SLZB-06U
MAINSTREAM
SLZB-06P7U
EXTENDED
SLZB-06P10U
RECOMMENDED
SLZB-06MU
SILABS
SLZB-06Mg24U
MG24
SLZB-06Mg26U
PREMIUM
Radio chip CC2652P CC2652P7 CC2674P10 EFR32MG21 EFR32MG24 EFR32MG26
Vendor Texas Instruments Silicon Labs
How to get started
01
Connect power and network
Ethernet cable (with or without PoE) or USB-C. Both can be connected simultaneously.
02
Choose a mode in the web interface
Zigbee coordinator, Zigbee router, or Matter-over-Thread border router — no flashing cable or toolchain required.
03
Connect to the server
Copy the device's network address into Home Assistant, Zigbee2MQTT, or ZHA.


Key hardware features
ESP32-S3 core + PSRAM
Dual-core controller running SLZB-OS, networking, USB host, and web interface.
Ethernet W5500
10/100 Mbps hardware TCP/IP controller from WIZnet — stable connection without interference.
+5 dB swivel antenna
External L-shaped antenna with 3-axis adjustment for the best signal.
4 LEDs + button
Visual indication of power, connection, and mode. One button for switching modes.
USB-C power
5V power supplied separately from the passthrough port, with optical isolation from PoE.
Compact enclosure
160 × 24 × 28 mm, wall mounting with screws or double-sided tape.
Unique feature for coordinators
USB Passthrough — a second USB device over the network

SLZB-06xU has a dedicated USB host port that exposes not only the built-in radio chip over the network, but also any external USB device connected to it. This is a rare feature among Zigbee/Thread coordinators — most devices on the market provide network access only to their own built-in radio.

Connect a Z-Wave dongle, BLE module, or another USB-serial device (based on CP2102, CH340, or CDC\_ACM chips) to the USB port of SLZB-06xU — and it will become available over the network via TCP/IP, just like the built-in coordinator.

Limitation: only one external USB device can operate through passthrough at a time.

Software
Bluetooth Proxy — simultaneously with Zigbee/Thread
New in the U series: thanks to PSRAM, the device works as a BLE proxy for Home Assistant simultaneously with the main radio, without reflashing to a separate ESPHome build.
Zigbee Hub mode
Direct control of Zigbee devices through the web interface, without a separate server. Available on SLZB-06U, 06P7U, and 06P10U (Texas Instruments chips).
OTA updates
Update the radio chip firmware and SLZB-OS over the network with one click.
WireGuard VPN + DDNS
Secure remote access to the device, even if your provider changes the IP address.
ESPHome support
Switch to ESPHome through the built-in web flasher and back, without a flashing cable.
Multilingual interface
Convenient web interface in multiple languages and LED indication control.

4G modem operation
Via USB Passthrough

For locations without wired internet or Wi-Fi, the SLZB-06xU coordinator can be connected to mobile internet via SMLIGHT USB-Extender, if the modem antenna needs to be placed separately. 

The 4G modem connects through the USB host passthrough port, so it occupies the only available passthrough channel — another external USB device (Z-Wave, BLE, etc.) cannot be connected simultaneously with the 4G modem. Together with WireGuard VPN, this provides a fully autonomous, remotely accessible smart home gateway where there is no wired internet.



     Important — read before ordering
Zigbee Hub mode — only on TI chips
SLZB-06U, SLZB-06P7U, and SLZB-06P10U support Zigbee Hub mode. This function is not available on Silicon Labs models (06MU, 06Mg24U, 06Mg26U).
USB Passthrough — one device at a time
Only one external USB device (Z-Wave, BLE module, or 4G modem) can be connected through the USB host simultaneously. 
The exception is devices based on the CP2102 radio chip, they support connecting up to 2 USB devices!
Ideal for
Placing the coordinator away from the server via Ethernet network.
Matter-over-Thread border router alongside an existing Zigbee network.
Protocol expansion via USB passthrough — Z-Wave, BLE, or 4G without separate devices.
Technical specifications
Type Ethernet Zigbee/Thread coordinator, series with 6 chip options
Radio chip CC2652P / CC2652P7 / CC2674P10 / EFR32MG21 / EFR32MG24 / EFR32MG26 — depending on the model (see table above)
Controller ESP32-S3, 2 cores × 240 MHz, with PSRAM
Ethernet W5500 (WIZnet), 10/100 Mbps
USB USB host for passthrough of one external device + USB-C power
Power PoE 802.3af (48V) or USB-C (5V), can be used simultaneously
Antenna External, +5 dB, swivel (L-shaped)
Firmware SLZB-OS · WireGuard · DDNS · OTA · Bluetooth Proxy · multilingual web interface · ESPHome
Dimensions / weight 160 x 24 x 28 mm · 86 g
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Have a look on this
Similar products
New arrival
SLZB-07x Zigbee USB EFR32 Adapter
SLZB-07x Zigbee USB EFR32 Adapter
USB Zigbee/Thread stick · SMLIGHT SLZB-07x. The smallest way to add Zigbee to your..
$0.00
New arrival
SLZB-MRxU Zigbee+Thread Ethernet PoE USB LAN WIFI Adapter
SLZB-MRxU Zigbee+Thread Ethernet PoE USB LAN WIFI Adapter
Multi-radio Ethernet coordinator series · Zigbee + Thread simultaneously · SLZB-OS · SMLIGHT ..
$0.00
New arrival
SMHUB-Nano MRx
SMHUB-Nano MRx
Compact Linux hub · 2× Zigbee/Thread · SMHUB-OS · SMLIGHT SMHUB NanoMR. Two radios. One Li..
$0.00
New arrival
USB-A-to-Type-C Adapter (90°) 15cm
USB-A-to-Type-C Adapter (90°) 15cm
OTG adapter · USB-C → USB-A · SMLIGHT USB-A-to-Type-C Adapter. 15 cm. Angled. ..
$2.90
New arrival
SMLIGHT addons — Ethernet, 4G, Z-Wave, PoE, Microphone
SMLIGHT addons — Ethernet, 4G, Z-Wave, PoE, Microphone
Expansion modules · optional add-ons · SMLIGHT Addons. One hub. Multiple capabilit..
$0.00
0
0